Decision to update US nickel scrap prices

Fastmarkets has implemented a comprehensive update of its nickel scrap prices to bring them in line with its global price reporting agency standards.

The update consists of a number of steps, including a consolidation of the price assessments for nickel scrap in the United States.

Fastmarkets will publish a single delivered processor price range for each grade in the United States, rather than a price range for individual cities for the broker/processor buying prices. The price will be based off an assessment of the various inputs Fastmarkets receives. The name for these markets will also be changed to processor buying prices. The frequency of the market assessment will remain twice a month.

As part of this update to the broker/processor buying prices, Fastmarkets will discontinue the following grades:

  • Nickel scrap solids
  • Nickel turnings scrap
  • Monel R-400 scrap solids and clips
  • Monel scrap turnings
  • Monel K-500 (castings) solids and clips
  • Invar Solids
  • 17-4PH solids: switched over into the stainless steel processor buying price list.

Fastmarkets will also delist its current set of nickel scrap dealer buying prices due to a lack of liquidity.

Following the update, Fastmarkets expects to initiate another consultation in 2023 on the potential launch of price assessments for additional grades of stainless steel scrap and nickel alloys.

A 30-day consultation period for this proposal began on Monday September 19 and ended on Tuesday October 18. An update to this notice was published on Wednesday October 19.

The following prices would be affected by the proposed changes:

Nickel scrap broker/processor buying prices:
Assessment: Inconel 600 Solids
Quality: Inconel is a registered trademark superalloy containing a minimum equal to or greater than 72% nickel. High temperature and extreme corrosion resistance applications. Nominal chemistry: Ni 76% Cr 15.5% Fe 8.0%
Location: United States delivered to destination
Unit: US cents per pound
Publication: Every two weeks
ISRI code: None

Assessment: 309 Stainless Steel Solids
Quality: This higher nickel grade stainless is used in many heat treat applications. The higher nickel and higher chromium values provide good resistance to higher temperatures. Nominal analysis: Ni 12 Cr 25 Fe Balance
Location: United States delivered to destination
Unit: US cents per pound
Publication: Every two weeks
ISRI Code: None
Industry marking: RA 309, HH

Assessment: 310 Stainless Steel Solids
Quality: The 310 stainless steel grade is a medium high nickel grade used in many heat treat applications with high temperatures and higher corrosion resistance qualities. Nominal analysis: Ni 20 Cr 25 Fe balance
Location: United States delivered to destination
Unit: US cents per pound
Publication: Every two weeks
ISRI code: None
Industry marking: RA 310, HK 40

Assessment: 330 Stainless Steel Solids
Quality: This grade is used extensively in the heat treat industry designed for high temperature applications. Nominal analysis: Ni 35% Cr 15% Fe Balance
Location: United States delivered to destination
Unit: US cents per pound
Publication: Every two weeks
ISRI code: None
Industry Marking: RA 330, HT

Assessment: Inconel 601 Solids
Quality: This alloy has high temperature strength, retains ductility, and has excellent corrosion resistance. Nominal analysis: Ni 60.5% Cr 23% Fe 14% Other Balance
Location: United States delivered to destination
Unit: US cents per pound
Publication: Every two weeks
ISRI code: None

Assessment: 17-4PH Solids
Quality: 17-4PH is a martensitic grade that is ductile and tough. Some common applications are golf clubs, firearms, pump parts, and chemical processing equipment.
Location: United States delivered to destination
Unit: US cents per pound
Publication: Every two weeks
ISRI code: None

The following grades would be discontinued:
Assessment: Nickel clips and solids
Quality: Common forms include new sheet, plate, bar, tube, and other miscellaneous solids. Free of foreign attachments and other contamination. Nominal chemistry: Ni 99% plus
Location: United States delivered to destination
Unit: US cents per pound
Publication: Every two weeks
ISRI code: Aroma (new nickel scrap) Burly (old nickel scrap)

Assessment: Nickel Turnings
Quality: Turnings and shavings from bar products. Nominal chemistry: Ni 99% on a dry basis after yield loss.
Location: United States delivered to destination
Unit: US cents per pound
Publication: Every two weeks
ISRI code: None
Assessment: R Monel Solids
Quality: R-405 Monel is a nickel-copper alloy and a free machining grade of Monel 400. Must be clean and free of all attachments and contamination. Nominal chemistry: Ni 66% Cu 31.5%
Location: United States delivered to destination
Unit: US cents per pound
Publication: Every two weeks
ISRI code: Hitch

Assessment: Monel Turnings
Quality: Mixed Monel turnings containing a minimum of 60% nickel content dry, on a yielded basis.
Location: United States delivered to destination
Unit: US cents per pound
Publication: Every two weeks
ISRI code: Lemur

Assessment: K Monel Solids
Quality: K Monel (K 500) has added strength and hardness with the addition of Aluminium and titanium. Applications include pump shafts, impellors, oil well parts, and pumps in marine service. Nominal chemistry: Ni 65% Cu 29.5%
Location: United States delivered to destination
Unit: US cents per pound
Publication: Every two weeks
ISRI code: Indian

Assessment: Invar Solids
Quality: Invar and Invar 36 is a nickel-iron alloy that retains good strength and toughness. Applications include laser components and production process is similar to austenitic stainless steel grades. Nominal analysis: Ni 36% Fe Balance
Location: United States delivered to destination
Unit: US cents per pound
Publication: Every two weeks
ISRI Code: None

To provide feedback on this update, or if you would like to provide price information by becoming a data submitter to the nickel scrap assessments, please contact Sean Barry at pricing@fastmarkets.com. Please add the subject heading: “FAO: Sean Barry re: nickel scrap.”

To see all of Fastmarkets’ pricing methodology and specification documents, go to https://www.fastmarkets.com/methodology.

What to read next
Fastmarkets will amend the specifications of its existing price assessments for Europe/US lithium spot battery-grade and technical-grade lithium hydroxide and carbonate to remove the US footprint, and will launch weekly price assessments for spot battery-grade and technical-grade lithium hydroxide and carbonate for the United States and Canada on Thursday April 4.
The March 2024 monthly averages were published today based on the index values of March 1, 8, 15 and 22.
Fastmarkets has corrected its MB-STE-0034 steel domestic plate 8-40mm, exw Northern Europe and MB-STE-0035 Steel domestic plate 8-40mm, exw Southern Europe assessments, which were published incorrectly on Wednesday March 27.
The publication of Fastmarkets’ daily assessment for aluminium P1020A premium, ddp Midwest US was delayed on Wednesday March 27. Fastmarkets’ pricing database has been updated.
Fastmarkets' holiday pricing schedule for 2024 has been updated to reflect the change in the pricing frequency of its mixed hydroxide precipitate (MHP) cif China, Japan and South Korea (CJK) prices.
Fastmarkets is inviting feedback from the industry on the pricing methodologies for its steel hot-rolled coil index domestic, exw Northern Europe, €/tonne (MB-STE-0028) and steel hot-rolled coil index, fob mill US Midwest, $/cwt (MB-STE-0184) as part of its annual methodology review process.